Amiga 1000 Serial 25 pin Connector Pinout
From AllPinouts
Connector pinout for: Amiga 1000 Serial 25 pin
25 PIN D-SUB FEMALE at the Amiga 1000.
| Pin | Name | Dir | Description |
|---|---|---|---|
| 1 | SHIELD | ------ | Shield Ground |
| 2 | TXD | OUT | Transmit Data |
| 3 | RXD | IN | Receive Data |
| 4 | RTS | OUT | Request to Send |
| 5 | CTS | IN | Clear to Send |
| 6 | DSR | IN | Data Set Ready |
| 7 | GND | ------ | System Ground |
| 8 | CD | IN | Carrier Detect |
| 9 | n/c | - | |
| 10 | n/c | - | |
| 11 | n/c | - | |
| 12 | n/c | - | |
| 13 | n/c | - | |
| 14 | -5V | OUT | -5 Volts DC (50mA max) |
| 15 | AUDO | OUT | Amiga Audio Out (Left) |
| 16 | AUDI | IN | Amiga Audio In (Right) |
| 17 | EB | - | EB=Buffered Port Clock 716 kHz |
| 18 | /INT2 | ? | Interrupt 2 |
| 19 | n/c | - | |
| 20 | DTR | OUT | Data Terminal Ready |
| 21 | +5V | OUT | +5 Volts DC |
| 22 | n/c | - | |
| 23 | +12V | OUT | +12 Volts DC (20 mA max) |
| 24 | /C2 | OUT | C2=Clock 3.58MHz |
| 25 | /RESET | OUT | Reset |
Notes
- Direction is DTE (Computer) relative DCE (Modem).
- Do not connect SHIELD(1) to GND(7).
References
- Aron P. Müller
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
