Apple IIc Plus Printer/Modem port Connector Pinout
From AllPinouts
Connector pinout for: Apple IIc Plus Printer/Modem port
Apple IIc Plus Printer/Modem port - 8 Pin MiniDIN female connector
| Pin | Signal | Name | Notes |
|---|---|---|---|
| 1 | DTR | Data Terminal Ready | becomes active when the IIc is ready to go on line |
| 2 | DSR | Data Set Ready | is asserted by the device the IIc is connected to when it is ready to go on line |
| 3 | TD | Transmit Data | conveys serial data sent from the IIc |
| 4 | GND | Ground | |
| 5 | RD | Read Data | receives serial data sent from the device to the IIc it is connected to |
| 6 | GND | Ground | |
| 7 | NC | Not Connected | |
| 8 | GND | Ground |
Modem Start-up Characteristics
- 300 baud
- 8 data bits
- No parity
- 1 stop bit
- No screen echo
- No Line Feed after Carriage Return (no LF after CR)
- No Carriage Returns in output stream
- Command Char= Control-A
Printer Start-up Characteristics
- 9600 baud
- 8 data bits
- No parity
- 2 stop bits
- 80-column line
- No screen echo
- Line Feed after Carriage Return
- Command Char= Control-I
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
