Commodore C64 RS232 User Port Connector Pinout
From AllPinouts
Connector pinout for: Commodore C64 RS232 User Port
Available on the Commodore C64/C128. Software emulated. The signals does not have true RS232 levels. It's TTL level, and RXD/TXD is inverted. It's just the normal User Port, used as a RS232 port.
24 PIN EDGE DZM 12 DREH Male Connector at the computer.
| Pin | Name | RS232 | Description |
|---|---|---|---|
| A | GND | GND | Protective Ground |
| B+C | FLAG2+PB0 | RxD | Receive Data (Must be applied to both pins!) |
| D | PB1 | RTS | Ready To Send |
| E | PB2 | DTR | Data Terminal Ready |
| F | PB3 | RI | Ring Indicator |
| H | PB4 | DCD | Data Carrier Detect |
| K | PB6 | CTS | Clear To Send |
| L | PB7 | DSR | Data Set Ready |
| M | PA2 | TxD | Transmit Data |
| N | GND | GND | Signal Ground |
References
- Commodore Manual
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
