DEC DLV11-J Serial Connector Pinout
From AllPinouts
Connector pinout for: DEC DLV11-J Serial
Available on the DEC DLV11-J Serial card
10 pin IDC male connector at the Serial card.
| Pin | Name | Dir | Description |
|---|---|---|---|
| 1 | CLK | ? | Clock |
| 2 | GND | - | Ground |
| 3 | TXD+ | OUT | Transmit data + |
| 4 | TXD- | OUT | Transmit data - (0V for RS-232, Reader enable for 20mA) |
| 5 | GND | - | Ground |
| 6 | n/c | - | Not connected (no pin) |
| 7 | RXD- | IN | Receive data - |
| 8 | RXD+ | IN | Receive data + |
| 9 | GND | - | Ground |
| 10 | +12V | OUT | +12 VDC |
Notes
- Direction is Serial card relative other Devices
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
