DEC Dual RS-232 Connector Pinout
From AllPinouts
Connector pinout for: DEC Dual RS-232
Found on the DEC Multia and DEC UDB (Universal Desktop Box). It contains two Serial ports on one connector. The 1st Port is located on the normal pins, and the 2nd port is located on some "spare" pins.
25 PIN D-SUB MALE at the computer
| Pin | Port | Name | Dir | Description |
|---|---|---|---|---|
| 1 | n/c | Not connected | ||
| 2 | 1 | TXD | OUT | Transmit Data |
| 3 | 1 | RXD | IN | Receive Data |
| 4 | 1 | RTS | OUT | Ready To Send |
| 5 | 1 | CTS | IN | Clear To Send |
| 6 | 1 | DSR | IN | Data Set Ready |
| 7 | 1+2 | GND | - | Ground |
| 8 | 1 | DCD | IN | Data Carrier Detect |
| 9 | n/c | Not connected | ||
| 10 | n/c | Not connected | ||
| 11 | 2 | DTR | OUT | Data Terminal Ready |
| 12 | 2 | DCD | IN | Data Carrier Detect |
| 13 | 2 | CTS | IN | Clear To Send |
| 14 | 2 | TXD | OUT | Transmit Data |
| 15 | n/c | Not connected | ||
| 16 | 2 | RXD | IN | Receive Data |
| 17 | n/c | Not connected | ||
| 18 | n/c | Not connected | ||
| 19 | 2 | RTS | OUT | Ready To Send |
| 20 | 1 | DTR | OUT | Data Terminal Ready |
| 21 | n/c | Not connected | ||
| 22 | 1 | RI | IN | Ring Indicator |
| 23 | 2 | DSR | IN | Data Set Ready |
| 24 | n/c | Not connected | ||
| 25 | 2 | RI | IN | Ring Indicator |
Notes
- Direction is DTE (Computer) relative DCE (Modem)
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
