EIA/TIA-562 Serial Connector Pinout
From AllPinouts
Connector pinout for: EIA/TIA-562 Serial
TIA/EIA-562 is a very similar to TIA/EIA-232-F with data rates up to 64 kbps supported.
TIA/EIA-562 is an electrical only standard. It's not complete standard and intended to be referenced by complete standards, such as TIA/EIA-561. No pinout available. TIA/EIA-562 standard defines an unbalanced, unidirectional, point-to-point interface, with support of inter-operability with TIA/EIA-232-F devices.
- Driver Loaded Output Voltage (Min. Level) ≥ | 3.3V |
- Driver Open Circuit Output Voltage ≤ | 13.2V |
- Driver Loaded Output Voltage (3 kΩ) ≥ | 3.7V |
- Driver Short Circuit Current ≤ | 60 mA |
- Driver Transition Time Controlled
- Maximum Driver Slew Rate ≤ 30 V/μs
- Driver Output Resistance (Power Off) ≥ 300Ω
- Receiver Input Resistance 3 kΩ to 7 kΩ
- Maximum Receiver Input Voltage ±25V
- Receiver Thresholds ±3V
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
