This website uses only session cookies and does not use profiling cookies for the purposes of sending targeted advertisements. However, this site uses "third parties" cookies installed by different services than the site you are visiting. To disable the third-party profiling cookies, please visit the following links: AddThis Targeting Opt-Out, Google Ads Settings. By using this website, you agree to our use of cookies.

HP Vectra Power Supply 13 pin Connector Pinout - AllPinouts

From AllPinouts
Jump to: navigation, search

Non-standard ATX MB power connector with additional 6-pin Molex for 3.3V

Single-in-line Molex-like 13-hole connector with one hole empty.
Looking on the metal latches side of the connector, wires UP, "1st" pin is on the LEFT.
PSU'S Additional 6 pin Molex 3.3V connector pinout is BLACK WIRES=GND, BROWN WIRES=+3.3V

Pin Name Color Description
1 -5V purple -5V 0.2A
2 -12V green -12V 0.5A
3 +5V red +5V
4 +5V red +5V
5 +5V red +5V
6 +5V_STBY orange +5V Standby, seems not more than 50mA
7 +12V yellow +12V
8 GND black
9 GND black
10 GND black
11 PWR_ON white Power ON from motherboard, ON=LOW (short it to GND for power on)
12 empty pin removed, closed with a plastic plug
13 PG blue Power Good to motherboard, PG=Hi


Personal tools
AllPinouts is owned by LTD, the content is available under GFDL.