Lowrance iFinder GPS Connector Pinout
From AllPinouts
Connector pinout for: Lowrance iFinder GPS
Lowrance iFinder GPS 7 pin connector
This connector is available on the Lowrance iFinder, AirMap 600C, PhD, H2O, Hunt, and other units.
| Pin | Name | Description |
|---|---|---|
| 1 | ext. power | 3.3v externally regulated. DO NOT FEED WITH 12 VOLTS! |
| 2 | serial in | RS232 data, connect straight to PC com port |
| 3 | serial out | RS232 data, connect straight to PC com port |
| 4 | ground | signal ground |
| 5 | headphone select | ground this pin to disable internal beeper and send audio out connector instead |
| 6 | left audio | for the firmware's mp3/ogg player, of course |
| 7 | right audio | and the waypoint voicenote feature, too |
Notes
- The PC-DI7 cable uses four pins, but doesn't bring out the audio connections for simultaneous use as an audio player.
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
