Navigon 7100, 7110, 5100, 5110 Power Charger Connector Pinout
From AllPinouts
Connector pinout for: Navigon 7100, 7110, 5100, 5110 Power Charger
5 pin mini-USB plug connector.
Wiring diagram pinout for Navigon GPS power charge.
| Pin | Name | Description |
|---|---|---|
| 1 | +5V | 5 Volts Direct Current |
| 2 | Data | floating/Not connected |
| 3 | Data | floating/Not connected |
| X | Ident | Conneted to Pin 4 (GND) as pure short, no resistor |
| 4 | Ground | Ground, shorted to pin "X" |
Notes
- The use of standard mini-USB B connector will place unit in Data Exchange/Synchronization mode.
- The use of standard mini-USB B connector with a 4-x pure short will allow use of Navigation software and concurrent charging.
- USB power source must be 1000 mA or above.
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
