Navigon GPS 7100, 7110, 5100, 5110 TMC/RDS and Audio Connector Pinout
From AllPinouts
Connector pinout for: Navigon GPS 7100, 7110, 5100, 5110 TMC/RDS and Audio
4 pin 3.5mm (2.5mm) plug connector at the cable.
3.5mm four pole pinout for Navigon GPS TMC Antenna and Audio Output
| Pin | Name | Description |
|---|---|---|
| 1 | R-Audio | Right Channel Audio out |
| 2 | L-Audio | Left Channel Audio out |
| 3 | Ground | Ground |
| 4 | Antenna | Antenna in |
Notes
- Navigon 71xx and 51xx uses same female 3.5 mm for audio out and TMC/RDS (Traffic information via FM reception) antenna.
- Audio out and TMC in concurrently can be achieved with splitting R/Gnd, L/Gnd and Ant/Gnd using common 3.5 mm splitter cables used for 3.5 to stereo audio and composite video with video diverted to FM antenna.
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
