Nintendo Gamecube controller connector pinout Connector Pinout - AllPinouts
From AllPinouts
Videogames connector for the Nintendo Gamecube Controller.
Seven (7) pin Nintendo GameCube controller male connector
Seven (7) pin Nintendo GameCube controller connector.
| Pin | Color | J1 | Function |
|---|---|---|---|
| 1 | Yellow | 2 | 5V power supply (used by rumble motor). |
| 2 | Red | 3 | DATA line: bi-directional data to/from console, pull-up to 3.43V |
| 3 | Green | 4 | Ground. |
| 4 | White | 5 | Ground (Extrme Skillz GC to USB interface has pins 3+4 wired as common ground). |
| 5 | - | - | Unknown. |
| 6 | Blue | 1 | 3.43V logic supply. |
| 7 | Black | 6 | Cable shielding / ground. Usually the same ground that pin 3. |
Notes
- This applies to the Extreme Skillz Gamecube to USB adapter.
- J1: Pinout of the connector inside the controller
