Nullmodem Mac to C64 Cable Pinout
From AllPinouts
Cable pinout for: Nullmodem Mac to C64
The RS-232 standard on the C64 is a little bit strange. It uses inverted TTL level for the signals. The RS-422 ports on the Macintosh has both an inverted and non-inverted input. By using the inverted instead of non-inverted the inverted C64 level is back to normal.
8 PIN MINI-DIN MALE to the Macintosh
DZM 12 DREH to the C64 UserPort
| Mac | C64 | ||
|---|---|---|---|
| GND+RXD- | 4+5 | 1+12+A+N | GND |
| RXD+ | 8 | M | TXD (PA2) |
| TXD+ | 6 | B+C | RXD (FLAG2+PB0) |
| D+E | RTS+DTR (PB1+PB2) | ||
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
