RS-232D Serial RJ-45 8 pin Connector Pinout
From AllPinouts
Connector pinout for: RS-232D Serial RJ-45 8 pin
RJ-45 8pin male connector
RJ-45 8pin female connector
| Pin | Name | Dir | Description |
|---|---|---|---|
| 1 | DSR / RI | IN | Data Set Ready / Ring Indicator |
| 2 | CD | IN | Carrier Detect |
| 3 | DTR | OUT | Data Terminal Ready |
| 4 | GND | System Ground | |
| 5 | RXD | IN | Receive Data |
| 6 | TXD | OUT | Transmit Data |
| 7 | CTS | IN | Clear to Send |
| 8 | RTS | OUT | Request to Send |
Notes
- Direction is DTE (Computer) relative DCE (Modem)
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
