RS-232 PC Serial DE-9 Connector Pinout
From AllPinouts
Connector pinout for: RS-232 PC Serial DE-9
9 pin DE9 male connector at the computer.
10 pin IDC male connector at motherboard.
| DE9 Pin | IDC 10 Pin | Name | Dir | Description |
|---|---|---|---|---|
| 1 | 1 | CD | IN | Carrier Detect |
| 2 | 3 | RXD | IN | Receive Data |
| 3 | 5 | TXD | OUT | Transmit Data |
| 4 | 7 | DTR | OUT | Data Terminal Ready |
| 5 | 9 | GND | - | System Ground |
| 6 | 2 | DSR | IN | Data Set Ready |
| 7 | 4 | RTS | OUT | Request to Send |
| 8 | 6 | CTS | IN | Clear to Send |
| 9 | 8 | RI | IN | Ring Indicator |
Notes
- Direction is DTE (Computer) relative DCE (Modem)
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
