RS-449 (EIA-449 - ISO 4902) Secondary Serial Connector Pinout
From AllPinouts
Connector pinout for: RS-449 (EIA-449 - ISO 4902) Secondary Serial
9 pin D-SUB male connector at the computer.
RS-449 is also know as: EIA-449, ISO 4902. Secondary (auxilary) channel.
| Pin | Name | RS232 | V.24 | Dir | Description |
|---|---|---|---|---|---|
| 1 | n/a | 101 | - | Shield | |
| 2 | SSR | SRR | 122 | IN | Secondary Receiver Ready |
| 3 | SSD | SSD | 118 | OUT | Secondary Send Data |
| 4 | SRD | SRD | 119 | IN | Secondary Receive Data |
| 5 | SG | SG | 102 | - | Signal Ground |
| 6 | RC | RC | 102b | - | Receive Common |
| 7 | SRS | SRS | 120 | OUT | Secondary Request To Send |
| 8 | SCS | SCS | 121 | IN | Secondary Clear To Send |
| 9 | SC | SC | 102a | - | Send Common |
Notes
- Direction is DTE (Computer) relative DCE (Modem).
- RS232 column is RS232 circuit name.
- V.24 column is ITU-TSS V.24 circuit name.
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
