RS-530 (EIA530) Serial 25 pin Connector Pinout
From AllPinouts
Connector pinout for: RS-530 (EIA530) Serial 25 pin
25 pin D-SUB male connector at the DTE (Computer).
25 pin D-SUB female connector at the DCE (Modem).
EIA-530, or RS-530, is a balanced serial interface standard that generally uses a 25 pin connector. The RS530 isn´t an actual interfaceis, but a generic connector specification. The connector pinning can be used to support RS422, RS423, V.35 and X.21 to name the most popular ones.
25 pin D-SUB male connector layout
RS530 is just like RS422 and uses a differential signaling on a DB25 - RS232 format - EIA-530 Transmit (and the other signals) use a twisted pair of wires (TD+ & TD-) instead of TD and a ground reference as in RS232 or V.24. This interface is used for HIGH SPEED synchronous protocols. Using a differential signaling allows for higher speeds over long cabling. This standard is applicable for use at data signaling rates in the range from 20,000 to a nominal upper limit of 2,000,000 bits per second. Equipment complying with this standard, however, need not operate over this entire data signaling rate range. They may be designed to operate over a narrower range as appropriate for the specific application.
| Pin | Name | Dir | Description | Circuit | Paired with |
|---|---|---|---|---|---|
| 1 | - | Shield | 18 | ||
| 2 | TxD | OUT | Transmitted Data | BA | 14 |
| 3 | RxD | IN | Received Data | BB | 16 |
| 4 | RTS | OUT | Request To Send | CA | 19 |
| 5 | CTS | IN | Clear To Send | CB | 13 |
| 6 | DSR | IN | Data Set Ready | CC | 22 |
| 7 | SGND | - | Signal Ground | Ground | 21 |
| 8 | DCD | IN | Data Carrier Detect | CF | 10 |
| 9 | IN | Rtrn Receive Sig. Elmnt Timing | DD | 17 | |
| 10 | IN | Rtrn DCD | CF | 8 | |
| 11 | OUT | Rtrn Transmit Sig. Elmnt Timing | DA | 24 | |
| 12 | IN | Rtrn Transmit Sig. Elmnt Timing | DB | 15 | |
| 13 | IN | Rtrn CTS | CB | 5 | |
| 14 | OUT | Rtrn TxD | BA | 2 | |
| 15 | IN | Transmit Signal Element Timing | DB | 12 | |
| 16 | IN | Rtrn RxD | BB | 3 | |
| 17 | IN | Receive Signal Element Timing | DD | 9 | |
| 18 | LL | OUT | Local Loopback | LL | 1 |
| 19 | OUT | Rtrn RTS | CA | 4 | |
| 20 | DTR | OUT | Data Terminal Ready | CD | 23 |
| 21 | RL | OUT | Remote Loopback | RL | 7 |
| 22 | IN | Rtrn DSR | CC | 6 | |
| 23 | OUT | Rtrn DTR | CD | 20 | |
| 24 | OUT | Transmit Signal Element timing | DA | 11 | |
| 25 | IN | Test Mode | TM |
Implementation Options
| DCE | DTE | ||
|---|---|---|---|
| RS530 | RS232 | V.35 | X.21 |
| 1 | 1 | A | 1 |
| 2 | 2 | P | 2 |
| 3 | 3 | R | 4 |
| 4 | 4 | C | |
| 5 | 5 | D | |
| 6 | 6 | E | |
| 7 | 7 | B | |
| 8 | 8 | F | |
| 9 | - | X | |
| 10 | - | - | |
| 11 | - | W | |
| 12 | - | AA | |
| 13 | - | - | |
| 14 | - | S | |
| 15 | 15 | Y | |
| 16 | - | T | |
| 17 | 17 | V | |
| 18 | - | - | |
| 19 | - | - | |
| 20 | 20 | - | |
| 21 | - | - | |
| 22 | - | - | |
| 23 | - | B | |
| 24 | - | U | |
| 25 | - | - | |
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
