Serial Printer 25 pin Connector Pinout
From AllPinouts
Connector pinout for: Serial Printer 25 pin
25 PIN D-SUB MALE at the printer
| Pin | Name | Dir | Description |
|---|---|---|---|
| 1 | SHIELD | - | Shield Ground |
| 2 | TXD | OUT | Transmit Data |
| 3 | RXD | IN | Receive Data |
| 4 | n/c | - | Not connected |
| 5 | n/c | - | Not connected |
| 6 | DSR | IN | Data Set Ready |
| 7 | GND | - | System Ground |
| 8 | DCD | IN | Data Carrier Detect |
| 9 | n/c | - | Not connected |
| 10 | n/c | - | Not connected |
| 11 | ? | OUT | Reverse Channel |
| 12 | n/c | - | Not connected |
| 13 | n/c | - | Not connected |
| 14 | n/c | - | Not connected |
| 15 | n/c | - | Not connected |
| 16 | n/c | - | Not connected |
| 17 | TTY-TXD | OUT | TTY Receive Data |
| 18 | n/c | - | Not connected |
| 19 | n/c | - | Not connected |
| 20 | DTR | OUT | Data Terminal Ready |
| 21 | n/c | - | Not connected |
| 22 | n/c | - | Not connected |
| 23 | ? | OUT | TTY Receive Data Return |
| 24 | ? | IN | TTY Transmit Data Return |
| 25 | TTY-RXD | IN | TTY Receive Data |
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
