Sony CMD 1000 Connector Pinout
From AllPinouts
Connector pinout for: Sony CMD 1000
| Pin | Signal Description |
|---|---|
| 1 | Power (+ 9V) |
| 2 | Battery charge |
| 3 | Handsfree sos |
| 4 | Handsfree extern (10K resistor to +9 to enable handsfree functions) |
| 5 | TXE |
| 6 | RXE |
| 7 | Ignition (10K resistor to +9 to illuminate the display continiously) |
| 8 | Antenna extern (10K resistor to ground to enable external microphone and antenna) |
| 9 | Audio 1 |
| 10 | Audio 2 (loudspeaker amplifier output) |
| 11 | Microphone (use electrect microfoon and 46 db preamp.) |
| 12 | Audio ground (do not connect to 13 and 14 ) |
| 13 | Ground (supply) |
| 14 | Ground (supply) |
References
- [ExiTuS], NokiaPort.de
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
