Two-Wire modem (9-25) Cable Pinout
From AllPinouts
Cable pinout for: Two-Wire modem (9-25)
serial interface cable This cable should be used for DTE to DCE (for instance computer to modem) connections without hardware handshaking.
9 pin D-SUB female connector to the Computer
25 pin D-SUB male connector to the Modem
| Female | Male | Dir | |
|---|---|---|---|
| Shield Ground | 1 | ||
| Transmit Data | 3 | 2 | OUT |
| Receive Data | 2 | 3 | IN |
| System Ground | 5 | 7 | |
| Jumper these: | |||
| Request to Send | 7 | OUT | |
| Clear to Send | 8 | IN | |
| Data Set Ready | 6 | IN | |
| Carrier Detect | 1 | IN | |
| Data Terminal Ready | 4 | OUT | |
| Request to Send | 4 | OUT | |
| Clear to Send | 5 | IN | |
| Data Set Ready | 6 | IN | |
| Carrier Detect | 8 | IN | |
| Data Terminal Ready | 20 | OUT |
Notes
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
