UPS YUNTO P SERIES (250/500/750/1250) Connector Pinout
From AllPinouts
Connector pinout for: UPS YUNTO P SERIES (250/500/750/1250)
9 PIN D-SUB FEMALE at the UPS
| Pin | Name | Dir | Description |
|---|---|---|---|
| 1 | Battery Mode | out | This pin is shorted to PIN 5 (ground) if the mains power supply fails or is out of tolerance. (NORMALLY OPEN) |
| 2 | - | - | - |
| 3 | - | - | - |
| 4 | - | - | - |
| 5 | Ground | - | Ground terminal and common root of contacts at PIN 1, 8 and 9 |
| 6 | - | - | - |
| 7 | UPS shut-down | IN | If a positive signal level (+5V to +12V DC) is applied, the UPS system switches off (PIN 5 is ground) |
| 8 | Battery Capacity Low | OUT | This pin is shorted to PIN 5 (ground) if the batteries have been discharged to such an extent that the remaining stored energy time is less than 2 minutes. (NORMALLY OPEN) |
| 9 | Battery Mode | OUT | The connection between this pin and PIN 5 (ground) is disconnected if the main power supply fails oe is out of tolerance. (NORMALLY CLOSED) |
Notes
- Direction is relative to UPS
References
Something left uncovered? You are welcome to add information, explanations and fix errors, simply by clicking the edit link that appears on top of this page. There is no need to worry about accidentally damaging AllPinouts when adding or improving information, as other editors are always around to advise or correct obvious errors, and AllPinouts's software, known as MediaWiki, is carefully designed to allow easy reversal of editorial mistakes.
